Comb Communications MKII Uživatelský manuál stáhnout pdf (Strana 27)

Page 27 of 56

Incoming Calls

There are two possible choices with incoming calls, you can either have the gate

pulse a relay or you can have a guard answer the incoming call. In each case you will

need to associate a relay and state whether CLI is on or off. If you set CLI on please

ensure that you notify everyone within the complex, any person who does not have

this service on his or her phone cannot make use of the incoming call.

Relays

There are 4 physical relays on the MKII board; these relays can be used for any

purpose. In the relays section you need to give the relays a name, this name is used

when reporting on the activity of that relay. There is also a drop down box to select the

type of relay, and lastly a time that the relay needs to pulse the gate. These times

range from '/z second to as much as 180 seconds (5 minutes).

Sim information

The sim information is not required to move on but it is highly recommended as the

voice number is used with other features of the website, with out the number these

features will not function. The voice number is the cellular number that the MKII runs

off. The data number is not required, if you have it please capture it.

SMS Group

The SMS group is a group of cellular numbers that will be notified when an input is

triggered. For example

the gate is stuck open and after 5 minutes the SMS group is SMSed with a message

"The gate is stuck open"

Type the number in the text box and click on add. You will see that the number

appears below the text box with a delete button next to it. Add all the numbers that

you want to have an SMS sent to. This is not a required section and can be left blank.

Inputs

The inputs are solely dependant on how you have wired the gate. There are 6 inputs,

which can be used; each input you could have 2 actions happen. The first step is to

enter a name, this name can be anything, then either normally open or normally

closed. The bounce time is the amount of time that must elapse before the action is

carried out again. For example the gate is stuck open, the bounce time would be set

to 3 minutes, every 3 minutes that the MKII recognises that the gate is stuck open it

will perform the actions.

There are a number of actions that the MKII can perform namely:

1. SMS -when selecting the SMS action there are two (2) parameters that need

to be set.

 Cell number - This is the number that the MKII must send the

SMS to.

 Message - This is the message that must be sent, for example "Gate

stuck open"

2. Group SMS -when selecting group SMS action there is only one parameter

that needs to be set, you have already set up the group.

 Message - This is the message that must be sent, for example "Gate

stuck open"

 Reboot - When you select reboot as an action, there is only one

parameter that you need to set.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 55 56

Komentáře k této Příručce

Žádné komentáře

Comb Communications MKII Uživatelský manuál Strana 27

Komentáře k této Příručce